Buying surplus electrical equipment in Maine
MAINE ELECTRICAL EQUIPMENT BUYERS

Sell 1,000-Amp Motor Control Centers (MCCs) in Maine

Sell 1,000-amp motor control centers in Maine. Identify the applicable rating and request an upfront cash offer with freight covered.

Or call us directly (614) 715-3047

Electrical switchgear on a truck for transport
MAINE SWITCHGEAR BUYERSSurplus equipment.
Real opportunities.
Payments Upfront
No Testing
We Cover All Freight
All Voltage Classes Bought
WHAT WE BUY

Your surplus has
potential.

We buy used, surplus and decommissioned electrical equipment across Maine. Tell us what you have and where it is.

We buy switchgear from decommissioned data centers and shut-down power plants. From qualified disconnects to hauling, we handle the logistics.

Data center decommissioning · Power plant teardowns

LET’S TALK EQUIPMENT
THE DETAILS
amperage
01 /

Selling the equipment

If you have 1,000-amp motor control centers in Maine, tell us whether the rating belongs to the complete assembly or to a particular device. We buy, rather than sell, used electrical equipment across all voltage classes and review the actual lot for a cash offer. If a sale is agreed, payment is upfront before pickup and we cover all freight for purchased equipment. Seller testing is not required, and neither an offer nor a collection date is guaranteed.

For equipment we purchase, we handle and cover the entire removal and logistics process: our qualified crews isolate and disconnect it, and we arrange crane work when needed, rigging, loading, hauling and all freight. You do not have to disconnect, test, rig, load or haul the equipment. We coordinate the work with the authorized site contact and follow the site's applicable safety and access procedures.

02 /

Identify the motor control centers

For a motor control center, describe the number of vertical sections and, if known, the number and types of installed buckets or units. Include the main bus rating, voltage, manufacturer and control-voltage information shown in existing records. Bucket identification and completeness can be as important as the outer cabinet.

03 /

Where the 1,000-amp rating appears

For 1,000-amp equipment, state exactly where the 1,000-amp marking appears: on the main bus, a main breaker, a breaker frame or another component. At this rating, a seller may be describing a main device, an assembly bus or an individual feeder; those are not interchangeable descriptions. Record the voltage, manufacturer, catalog identification and any documented interrupting rating separately. Do not add branch-breaker ratings to infer a main rating or change device settings to check it. If a label is inaccessible, use existing records or leave the figure unconfirmed. In a lot of motor control centers, provide the separate ratings of the assembly and individual devices where known; an incomplete label is not a reason to test the equipment.

04 /

Condition and completeness

List empty positions, missing buckets, damaged doors, removed controls and known water or process exposure. If spare buckets, drives or documentation are included, say so separately. Do not insert, withdraw or operate units to create an inventory; use existing records or exterior photographs where safe.

05 /

Access and collection planning

MCC sections and removable units need a coherent inventory when they are separated for transport. Tell us whether the lineup is intact, whether loose buckets are already boxed, and where each group is stored. Provide exterior dimensions and the route to the loading area, leaving any dismantling to qualified personnel.

Identify the building, equipment room, floor level and the practical route to a truck-accessible staging area. For occupied or shared premises, establish who controls the loading area, who can authorize release and whether an appointment is required. Explain any gate, weather, surface or security limitations that are known at the proposed collection date.

06 /

Consider records and known environmental issues

Provide existing manuals, drawings or maintenance summaries if they are available and appropriate to share, but do not create new records by opening electrical compartments. Where a lot includes associated equipment with a known fluid, suspect material, contamination or past spill, disclose what is known and identify any relevant existing documentation. Equipment type and site history differ, so the responsible owner and qualified specialists should determine whether any environmental assessment or special handling is needed. Do not assume that an age or brand establishes the presence or absence of a regulated material. Unknown information can be identified as unknown.

07 /

Identify the owner and the release contact

The person operating a building is not always the owner of its electrical equipment. A landlord, tenant, contractor, lender or other party may have an interest in some or all of the assets. Confirm who is authorized to sell the specific equipment and who will be available to release it to the carrier. If a demolition contractor is involved, clarify whether the contractor is merely removing the equipment or also owns it. For multiple sites, provide an appropriate contact at each location. Clear authority and accurate lot boundaries make the transaction simpler without requiring a seller to disclose unrelated confidential project information.

08 /

Use ratings exactly as recorded

Equipment labels can include several numbers that sound similar but answer different questions: the nominal system voltage, rated voltage, main bus current, breaker frame or trip rating, and interrupting capability. A catalog number is not automatically a rating. Copy the units and surrounding label text, and identify whether the number belongs to the complete assembly or one device. Existing documents may fill gaps but should be marked as records rather than treated as a fresh inspection. If a plate is missing or unreadable, say so. No seller is asked to energize, test or expose live equipment to resolve an uncertain value.

09 /

Electrical safety comes first

Before any electrical gear is disconnected, moved or closely accessed, qualified personnel must isolate it and establish its safe condition using the site's applicable procedures. Equipment adjacent to the lot can remain energized, and a building closure is not proof of isolation. Do not remove covers, expose conductors, operate switches or withdraw breakers to collect details. We do not require the seller to perform testing. If the nameplate or condition cannot be viewed safely, use existing documentation or identify that information as unavailable.

10 /

Cash offer, upfront payment and full-service removal

To request a cash offer for motor control centers, share the location, the quantity, the information available from existing records or safely accessible labels, and any known damage or missing parts. Include photographs only when they can be taken safely and are permitted by the site. Tell us when the equipment may be released and whether the lot includes related devices or documentation. If something is unknown, say so; no seller-performed electrical testing is needed.

We review the details and discuss an offer when the equipment and transaction are a fit. If an offer is agreed, we pay the agreed amount upfront before pickup. We arrange and cover qualified isolation and disconnects, crane work when needed, rigging, loading, hauling and all freight for the purchased equipment. The seller does not have to perform or arrange this work. Our crews coordinate access and the safe removal plan with the authorized site contact. There is no promise of a particular offer, acceptance or collection date.

A STRAIGHTFORWARD PROCESS

From surplus to sorted.

Have electrical equipment to move? Start with what you know. We’ll take it from there.

01

Share the details

Tell us about your equipment and send nameplate photos if you have them.

02

Discuss an offer

We review the information you provide. No testing is required from you.

03

We handle the work

We pay upfront. Crane, qualified disconnects, rigging, loading, freight and hauling are on us.

LET’S GET STARTED

Let’s talk
switchgear.

Have surplus equipment in Maine? Share a few details and we’ll be in touch about your request.

We buy switchgear from decommissioned data centers and shut-down power plants. Crane, rigging, disconnects, loading, freight and hauling are on us. Our qualified crews handle disconnects; the seller does nothing but get paid.

Text Nameplate Photos
QUOTE REQUEST

Tell us what you have.

Fill out the form below. Fields marked * are required.

Optional JPEG or PNG photos: 10 MB total for all attachments. Text us additional photos.

This form is submitted through FormSubmit, a third-party service. If the form or upload doesn’t work, text your nameplate photos or email us instead.

Request a Quote